Products from Synthware

Commonly used waterless calcium chloride and discolored silicone as solid adsorbents, more than two series use effect is better.

For solvent and chemical compatibility. Item R111EP with 11,81 mm inner diameter and 2,67 mm thickness. Application: O-ring for neu bushing B100015F with 15mm GL thread.

For solvent and chemical compatibility. Item R111EP with 11,81 mm inner diameter and 2,82 mm thickness. Application: O-ring for neu bushing B100015 with 15mm GL thread.

For solvent and chemical compatibility. Item R008EP with 4,5mm inner diameter and 1,78mm thickness.

For solvent and chemical compatibility. Item R009QB with 6,07 mm inner diameter and 1,78mm thickness. Application: O-ring for neu bushing B100007F with 7mm GL thread.

In-Ex tube was designed for gases related organic reactions. By using this special designed reaction tube, several gases relied organic reactions are applicable, including CO, SO2 and H2. Ex-situ gas production takes place in a reaction...

With 10mm O.D. hose connection. With check valve.

Similar to A23 except with perforated glass plate sealed above lower inner joint. Perforated glass plate reduces foam from being carryover.

With two 9mm O.D. sidearms sealed to the barrel at a 90° angle to one another. With vacuum metering plug. Viton® O-ring on PTFE shaft is protected with precision Teflon® wiper. The plug has a machined-in integral PTFE tip O-ring to make...

Dewar-type Condenser. Diameter of the inner tube is 31mm. Side 14/23 outer joint angled by 105°.

Dewar-type Condenser. Diameter of the inner tube is 31mm. Side 14/23 outer joint with 90° angle.

With three 9mm O.D. side arms. The non-rotating PTFE plug has three O-rings, the tip O-ring making the primary seal on the precision formed tapered seat.